Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
409 Posts
lankchevy said:
i was thinking drill thru the plates and bolt another plate under it then tie it into the 1/4 angle thats going to be on my uniframe rails.

kolby
That's the way to do it. Sandwhich the unibody and then tie it into the "frame". My B pillar comes down directly over the rails, so I didn't have to worry about that, but I did have to do that for the A pillar hoop.

 

·
Registered
Joined
·
409 Posts
I don't have a picture here with me....I'll take one when I get home though.

It comes down offset about 6"-8" from the frame. It's not in the way of the clutch or brake at all. I'm not sure what they give you with the kit, but when we installed mine at D&C we just made two identical plates and sandwhiched the floor. I have to tie it into the frame yet, but the picture will show you what I'm talking about.
 
1 - 3 of 3 Posts
Top