Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,219 Posts
The center section for the HP 30 which you have is not too bad. If you have money already tied up and do not plan on running larger than 36-37" tires, you can use TJ shafts to get 297 ujoints and eliminate the vacuum disconnect. You just need to change one seal. Then I would get a CJ inner C's and dana 44 flat top outer knuckles. Remove the inner C from your 30, and use the 44 stuff. Then you at least get hi steer capabilities, and better lock outs for cheaper than the warn conversion. You just need to know how to weld and rig up a jig.

Ben
 
1 - 1 of 1 Posts
Top