Pirate 4x4 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
476 Posts
Discussion Starter #1
Anyone know what a 32 spline 1310 UJ yoke came on??? I NEED ONE!!!!! <IMG SRC="smilies/frown.gif" border="0">
 

·
Registered
Joined
·
3,939 Posts
what diameter do you need? email me as a reminder and I'll check when I get home. I seem to remember having a large diameter odd spline count yoke.
 

·
Registered
Joined
·
476 Posts
Discussion Starter #3
1 3/8" 32 spline, 1310 UJ yoke. Rear output on a NP205 was 1 3/8" 32 spline but 1310?? or 1350?? I sent you a e-mail. thanks!!
 

·
Registered
Joined
·
1,043 Posts
is You'rs CV or Non CV

The Non CV 32 spline 1310 spicer
Part #2-4-4191
and National seal Part # 472015

Also !!!

Other Part #'s With 32 spline

1330 32 Spline Non cv spicer Part# 2-4-5521 National seal part # 472015

1330 32 Spline CV type Spicer Part# 2-4-5441 National Seal part# 473239 Stock Atlas Seal

1350 32 Spline Non CV Spicer Part# 3-4-6211 National Seal Part# 472015

do you need Cv Type?? I have A spare that I got Off a Buddy 32 Spline CV type 1310 Stock Atlas Type


Adam, <IMG SRC="smilies/jeep1.gif" border="0"> <IMG SRC="smilies/jeep1.gif" border="0">
 

·
Registered
Joined
·
476 Posts
Discussion Starter #6
The one I broke was a CV style. I'm am not running a CV though. I had to grind the yoke a bit to get enough angle out of it. Thanks for those #'s Adam, I just downloaded the Atlas booklet and found the same #'s Hey Jess, will the non-CV yoke travel farther than the CV yoke?? In need roughly 30 degree's.
 

·
Registered
Joined
·
12,234 Posts
the non c/v will not travel quite as much ground out in my opinion - you need our 1350 c/v man 32 degree's and damn tough- ask lance he will tell ya- I'm sure he has been hammering on his - Jess
 
1 - 7 of 7 Posts
Top