[scwafish]

Damn...been waiting so long to be at this point I can't believe they are actually in myself. <IMG SRC="smilies/bounce2.gif" border="0"> Thanks to Tusker for holding the backboard, or else they wouldnt be in! Ok, so here are some pics.

This is the whole shooting match from the side...
<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/tcsinside.jpg">

A little closer from the rear...
<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/tcsdriverside.jpg">

I used the stock toy rubber mount in the rear, inside a 4X2 0.25 channel, I used angle to hang it from the frame, everything is flush or higher than the bottom of the frame...
<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/tcsinxmember.jpg">

[ 10-28-2001: Message edited by: scwafish ]

 

[zuk88]

Looks good Scwafish!! I'll have to get down there and get a close up look soon!! <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0">

 

[scwafish]

Whats next?? Now that this is in its time to cut out a bunch of the tunnel to get it to fit. Sort of ironic since I just finished repairing all of the rust holes in the tub...fix the tub <IMG SRC="smilies/biggrin.gif" border="0"> ...then whack the tub <IMG SRC="smilies/crybaby2.gif" border="0"> oh well, I'm getting good at welding zuk sheetmetal. I've done lots of measuring and the tunnel chop will be significant, but not too severe.

 

[scwafish]

Zuk 88...hows your toy coversion coming? Feel free to come by.

 

[sawzall]

Looks sweet, is that a high pinion front diff I see?

 

[scwafish]

Yep!

 

[sawzall]

Nice <IMG SRC="smilies/glasses.gif" border="0">

 

[fatkid]

Nice, I like the welds. <IMG SRC="smilies/smile.gif" border="0">

 

[0ILBURNER]

Originally posted by sawzall:
<STRONG>Looks sweet, is that a high pinion front diff I see?</STRONG>

Scwafish,
You put the hi-diff in the Wrong End!! <IMG SRC="smilies/grinpimp.gif" border="0">

 

[Rocky Road]

Just curious where that rear shifter ends up being in relation to the driver's seat. Is it right at the parking brake opening? Behind it?

 

[bobaki]

about in the middle of the ebrake handle if i remember right <IMG SRC="smilies/biggrin.gif" border="0">

 

[bertha]

Originally posted by Rocky Road:
<STRONG>Just curious where that rear shifter ends up being in relation to the driver's seat. Is it right at the parking brake opening? Behind it?</STRONG>

Ditto <IMG SRC="smilies/confused.gif" border="0"> where does the shifter end up? Nice welds, nice work.

 

[poppycock]

looking good! <IMG SRC="smilies/grinpimp.gif" border="0">

 

[scwafish]

The rear shifter will come out about 2-3 inches in front of the end of the e-brake handle. However I think the the tunnel will have to be modified all the way to the rear of the e-brake handle for the increased height. I'll know for sure by sawzall-Sunday.

 

[incontrol]

I can almost hear the sound of the ignition key turning. Now will come the time when scwafish will have restless nights. <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

<IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">

 

[Alfred]

i thought you might like to see some tunnel-alternatives <IMG SRC="smilies/grinpimp.gif" border="0">

ok, its not on my sami but you get the idea
<IMG width=400 height=300 SRC="http://www.pirate4x4.com/ubb/uploads/aaa1.jpg">

<IMG width=400 height=300 SRC="http://www.pirate4x4.com/ubb/uploads/aaa2.jpg">


take care, Alfred

 

[Tusker]

Hey scwafish, there is an idea <IMG SRC="smilies/rolleyes.gif" border="0"> . It sure beats your aluminum foil tunnel idea LOL.

 

[bobaki]

duct tape is the way to go
<IMG SRC="smilies/biggrin.gif" border="0">

 

[Rudezuk]

How much further over does the Toy case output shaft sit vs's the zuk? I put D44's in mine and with the GRS1 the out put shaft sits about 2" towards the passenger side vs's the yoke on the rearend.....If I was close to that on the other side, i could move up to toy stuff!!! <IMG SRC="smilies/bounce.gif" border="0">

How much further back does it sit vs's the stock case? ....Do i get an even shorter rear dline?? <IMG SRC="smilies/confused.gif" border="0">

[ 10-30-2001: Message edited by: RudeZuk ]

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

[bobaki]

Shanesan not taking notes <IMG SRC="smilies/biggrin.gif" border="0">