Question AA Chevy Engine Mounts YJ?? - Pirate4x4.Com : 4x4 and Off-Road Forum

rls270 · 02-19-2004, 05:05 AM

I have my chevy 350 block lined up in my YJ with the trans and t-case in and there is know way that the advanced adapters engine mounts sit flush with the frame. Right now the top of the mounts stick up about a 1"above the frame. Lower the engine and they stick down below the frame.

Has anybody else used these engine mounts

AA weld in mounts that offset the engine 1"

I looked at the Jeep at 4wheeldrive hardware with LT1 and their mounts are flush with the frame top and bottom.

The only way they would be flush is to drop the driveline about 4".

NastyNate · 02-19-2004, 10:25 AM

I don't know what the AA mounts look like, but on my Novak mounts, I ended up flipping the frame mounts upside down to get it to sit where I wanted it. Is this a possibility?

02-19-2004, 05:05 AM	#1 (permalink)
rls270 Registered User Join Date: Dec 2002 Member # 15400 Location: Pittsburgh, PA Posts: 135	Question AA Chevy Engine Mounts YJ?? I have my chevy 350 block lined up in my YJ with the trans and t-case in and there is know way that the advanced adapters engine mounts sit flush with the frame. Right now the top of the mounts stick up about a 1"above the frame. Lower the engine and they stick down below the frame. Has anybody else used these engine mounts AA weld in mounts that offset the engine 1" I looked at the Jeep at 4wheeldrive hardware with LT1 and their mounts are flush with the frame top and bottom. The only way they would be flush is to drop the driveline about 4". __________________ 92 YJ, 383TPI,700r4,60's

02-19-2004, 10:25 AM	#2 (permalink)
NastyNate Registered User Join Date: Aug 2002 Member # 13276 Location: Chattanooga, TN Posts: 619	I don't know what the AA mounts look like, but on my Novak mounts, I ended up flipping the frame mounts upside down to get it to sit where I wanted it. Is this a possibility? __________________ Those who give up a little freedom for a little security, WILL SOON LOSE BOTH AND DESERVE NEITHER!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode