Pirate 4x4 banner
1 - 10 of 10 Posts

Flatty

· Registered
Joined
·
7,912 Posts
Discussion starter · #1 ·
I have a dana 300 and a HD TH400. These are not adapted, but all they need is an adapter from a NP205 to a TH400. They are both good. I bought thema while back, and was going to use them in my buggy. BUt I have since parted out the buggy, and this is all I got left. Located in Brentwood, CA 94513. I work in SF and do the commute every day, so I can deliver all the way out here, down the peninsula,... $300 OBO for both, or $200 for t-case and $100 for tranny.

DIma
415-517-2692
 
Save
Discussion starter · #3 ·
What's the splinescount on the D300? If the D300 already has the input shaft for the TH400 then i will take it.
Different spline counts. You will need to either replace the input (32 spline on the t-case) or the output shaft on the tranny. If I had the 32 spline input, I would be asking much more.

DIma
 
Save
Discussion starter · #6 ·
I have a dana 300 and a HD TH400. These are not adapted, but all they need is an adapter from a NP205 to a TH400. They are both good. I bought thema while back, and was going to use them in my buggy. BUt I have since parted out the buggy, and this is all I got left. Located in Brentwood, CA 94513. I work in SF and do the commute every day, so I can deliver all the way out here, down the peninsula,... $300 OBO for both, or $200 for t-case and $100 for tranny.

DIma
415-517-2692
Image
 
Save
1 - 10 of 10 Posts
You have insufficient privileges to reply here.