Dana 60 Kingpin Inner C's and Knuckles

Twright · May 20, 2009

Looking for a set of chevy/dodge Inner C's for the dana 60.

Also looking for chevy/dodge kingpin knuckles.

Ford knuckles and inner C's will work too, just not my first choice.

I DO NOT WANT, nor can afford Reid/Solid knuckles/inner c's so don't try to sell me those:flipoff2:

Taylor

trkklr77 · May 20, 2009

www.extremeaxlesales.com

everything you could want for stock axle parts.

t89blazer` · May 21, 2009

PM Sent!

rockcity · May 21, 2009

I tried pieceing this stuff together before and found it was just as cheap if not cheaper to just buy a good used D60 front.

nothing else useful to add...

bowmans_army · May 21, 2009

rockcity said:
I tried pieceing this stuff together before and found it was just as cheap if not cheaper to just buy a good used D60 front.

nothing else useful to add...

im almost done building my dana 70 front with dana 60 inner cs and knuckles from ebay for under 800 all new bearings breaks and seals and gears remember if you buy a whole front you still have to rebuild it and re gear it so i gess the dana 60 route is just a lazy mans route :shaking:

look on ebay there are a few pair of inner c on there for cheap

lt1yj · May 21, 2009

I have a set from a mid 80's Chevy. The inner C's came from a '79 Ford.

If you just want the knuckles and C's I'll sell them for $350 plus shipping.

If you want the spindles and caliper brackets too I'll go $450 plus shipping. One caliper bracket has a broken retainer bolt.

I also have a set of 35 spline Chevy Spicer 1541M stubs for $150.

kirbyiv · May 21, 2009

I have a pair of 88 ford knuckles. $175 for the pair. One of the top steering bolt holes is almost stripped, but I had my histeer arms tied into the stock part of the knuckle so I never worried about it

Dana 60 Kingpin Inner C's and Knuckles

Twright

trkklr77

t89blazer`

rockcity

bowmans_army

lt1yj

kirbyiv

Top Contributors this Month

Recommended Communities