96 SE7

RTE 3" and 235/85-16

 

OK here is what my rig used to look like (one week ago)

(hope this works)

Its a 76 rangie. bobed chassis. bobed cab. scout II d44 front and rear. 36in tyres etc etc

 

Hey that worked!!

OK this is what it looks like right now.

Exact same rig except the swaped body. Its now got an 88in series 2a swb body.

Still got heaps of work to do. At the moment the body is just sitting there but hopefully it should be drivable by the end of the week.

 

97 Discovery

RoverTym 3" Lift & all associated Goodies
4.10's, Detroit/TT Combo
32x9.5 TSL Swampers (33's in the works, gotta grow up slowly to Jackson's 35's)
Rancho 9000's
Aedofab Front Bumper and Sliders (rear in progress)
Warn HS9500i
Tom Woods CV Shafts
Ashcroft Heavy Duty Axles Shafts

Tom

:rasta: Just shut up and wheel, dammit!

 

Here's me at the TO 2001...She's changed A LOT in the last year...Gonna' be sportin' a Dana 60 front, 70 rear, King coil-overs on all 4 corners and 42" TSL's, part time LT230, stretchd to 107" etc...:smokin:

 

90 RRC

 

Here ya go!!

Yes, there has been some fender trimming and testing since this pic! Not done yet, but close! I'll get some snow run pics of the D90 soon.

Here's the D110 playing in the mud in Virginia!

Same rig in the Rocks in Cali!

-John

 

poser pic

here's my poser pic from the golden crack in moab

 

 

Heres my rig(white D90), its grown since then. Hope this works

JT

 

i don't own a rove, but will be running an lt-230
here is my friends cooper's rig

 

and a few more

 

and steven's range rover

 

one more of coop

 

New to the board, so here it goes:

'97 D90 ST with lots of stuff:

Picts at:
http://www.defender-90.com

Best New Pict:
http://www.defender-90.com/otr_01_db.htm

:flipoff2: :flipoff2: :flipoff2: :flipoff2:

Bill R.

 

Here it is.

Basic run down:

Original '53 80 inch frame
Custom coil suspension
Disco rear axle, RR front, ARB's both
Disco saggy springs
Chev 283
LT-95
Holley Pro-jection
6-point cage
Warn winches front/back
Custom EVERYTHING (if you can see it, it's custom)

Later,

Michael

http://communities.msn.com/TheSeriesOneGarage/seriousone.msnw?action=ShowPhoto&PhotoID=251

 

Here is a picture of the Dump Bump Wheel stand, now that I figured out how to post picts.:flipoff2: :flipoff2: :flipoff2:

Billster

 

Does the Disco have those "extra" links from the pumpkin to the frame that I believe I also saw on the D90 stock suspension?

It has two trailing links, rubber bush mounted to ears off of the frame like the D90 and an A-arm that has a balljoint on the center of the axle and mounts in two places on the outsides of a very substantial cross-member.

3 links at the rear axle, 4 holding it on to the frame. Make sense? I don't know the technical terms...

brian

 

My business partner just bought a Range Rover. Heres a pict of us ramp testing it. Its not bad for a stock machine that drives around corners like its on rails (well compared to any other forbie that ive been in)

 

Here are a few shots of my truck that a friend posted for me.


http://www.jpurnell.com/rr/superswampers_90RR.htm

Not "the baddest truck arround" but not to bad for a daily driver either. (I dont run the swampers on the road)

-Jeff
:flipoff2: :flipoff2:

 

here ya go jeff- welcome

 

Those are 34x9.5R15 Mounted on 15" series rims

Great off road. Suck on road. Don't comprmise, get a street set and a trail set.

-Jeff

 

Here is a pic of my 92 Strange Rover.

 

Current picture of my hybred.

Sam

 

Pic Of my D-90

Here is my truck.

:usa: